Saturday , July 20 2019
Home / austria / Kolink Inspire K1: a budget enclosure with impressive looks – GAMEtainment

Kolink Inspire K1: a budget enclosure with impressive looks – GAMEtainment

Kolink Inspire K1

Housing Expert Kolink extends its range from Inspire K1 by another
Affordable midi tower with impressive RGB LED lighting and even brighter
Features. The Inspire K1 board plate is made of acrylic glass and the front is made of tempered glass
is also visible. Here are two pre-installed RGB LED fans, their lighting
represents a unique design element through the folding frame. Now in

120 mm RGB fan LEDs are connected to a closed regulator. About one
The infrared remote control can control the RGB LED illumination. Two front fans are
connected to their 6-pin plugs on a closed steering wheel. About a similar closed
The remote can be set to 350 different effects. In a neat interior
Inspire K1 has enough space to present hardware. Sufficient room for cooling water and
Practical cable management are just some of the most important, despite the high quality
Processing of low cost chassis from Kolinka.

Features of the Kolink Inspire K1 RGB Midi Tower at a Glance:
– Design of the motherboard housing to ATX
– Front of acrylic glass and tempered glass
– 2x pre-installed 120 mm RGB LED fan, 1x 80 mm fan on the back
– I / O board with 2x USB 2.0 / 1x USB 3.0 and HD audio input / output
– Radiator support in 240 mm format
– 3x 3.5 and 2x 2.5 inch disk slot
– graphics cards up to 35 cm in length and a CPU cooler up to 15 cm in height
– Including fan and remote control

Supports motherboards in ATX form factor, with CPU cooling up to 15 cm high
as well as graphics cards up to 35 cm in length. For cooling, the 240-
mm radiator. If you do not want to mount only the M.2-SSD on the motherboard,
can block five more disks in the Kolink Inspire K1.

The new case of Kolink Inspire is now available at a cost of 49.90 euros in Caseking and
available from the beginning of January.

Kolink Inspire K1 "width =" 1000 "height =" 1000 "src =" 1000w, https: // 100w, /Blog-DE-Kolink-InspireK1-768x768.jpg 768w, 64w, https: / / 50w, Blog-DE-Kolink-InspireK1-45x45.jpg 45w, 400w "size =" ( max-width: 1000px) 100vw, 1000px

<! –


Source link