Friday , December 6 2019
Home / Uncategorized / How to create a do-it-yourself gimbal stabilizer

How to create a do-it-yourself gimbal stabilizer

People choose different types of cinema cameras, depending on their capabilities and needs: smartphones are ideal for beginners, action cams are perfect for on-the-go recording and digital SLRs have made possible cinematographic production at a professional level. But the unwanted vibrations and shocks can make the recorded video unstable, which is where cardan stabilizers are useful.

While the gimbal suspensions are a fairly new equipment, they have become an essential part of the shooting equipment for the filmmakers. This portable tool allows you to film in many different ways by isolating your camera from your movements, which allows you to move freely without interrupting shooting stability.

Only a few years ago, a branded gimbal would cost thousands of dollars, although prices have dropped dramatically since then. In fact, you can now buy a pretty good branded gimbal for a couple of hundred dollars (the average GoPro brand gimbal can easily reach $ 200 or more). However, you can still save a lot of money and have fun with shooting your camera, making your own gimbal.

Two-Axis Vs. Three-Axis

The two main types of cardanic suspension are two-axle universal joints and three-axis universal joints. For dual axle suspensions, the device has two rings and two motors that allow the camera to tilt and rotate, stabilizing the film as it moves. The three-axis cardan joints, on the other hand, can do the same, but also allow you to pan the camera from left to right.

Which type of gimbal do users prefer? Some gimbal users think that two-axle gimbal suspensions are easier to control and maintain more lively movement, while others prefer the more fluid movements that provide three-axis gimbals.

In this article, we'll show you how to make do-it-yourself camera stabilizers for action cameras, smartphones and DSLRs, which can be an economical solution for branded universal joints.

DIY Gimbal for DSLR cameras


  • Clamps for aluminum pipes
  • Carbon fiber tubes
  • Carbon fiber sheets
  • Brushless motors
  • Gimbal controller (without brushes)
  • Flanged bearings
  • Load bearing trees
  • Pitch arms
  • 5 Press the nuts
  • Heat shrink tubing
  • Respiratory mask
  • drill
  • Dremel
  • Drill bit
  • CNC or 3D printer

How to build:

Instructables user Thehydoctor has created an in-depth tutorial on how to build a do-it-yourself two-axis gimbal from the premium aspect. Get a professional rig camera with some electronic components and carbon fiber.

The construction of the entire gimbal requires two brushless motors, a controller board and a lithium polymer battery, while the frame can be manufactured in multiple ways. The process itself is boring, but Thehydoctor shows how to make the two-axis gimbal using the basic tools. It also provides STL files for all parts in case it is necessary to realize them with a CNC router or a 3D printer.

To make a qualitative leap, it gives you the chance to mount a monitor on your rig. This, of course, will cost you more. But the end result allows you to mount at least a seven-inch monitor on your two-axis gimbal stabilizer, which lets you see your shots while filming.

DIY Gimbal for Action cameras


  • cutter
  • Screwdriver
  • drill
  • pliers
  • A piece of wood
  • Angular corner brackets in steel
  • Four bottle caps
  • Handle for scooters for children

How to build:

The YouTube user, Brain techKnowlogy, shows users how to create a simple and economical three-axis gimbal. First, sculpt a piece of wood in the shape and size of the handle hole of the scooter. Then drill a hole in the wood and insert one of the bolts before inserting the wood into the hole in the handle. Then, fix the steel angle together using bolts and nuts. Use plastic bottle caps to cover the bolts and nuts using glue. For the final touch, screw the steel angle on the handle.

DIY gimbal for Action and smartphone cameras


  • Three-axis Gimbal
  • GoPro mounts
  • Waterproof box
  • Steel tube Rod
  • Grip of handles for bicycles

How to build:

In the video, YouTube user Shane reveals how he builds his homemade three-axis gimbal. When purchasing the gimbal, it comes with a base plate and a variety of screws. For the box, turn it over and place the base plate on the back. Be sure to mark each corner where you will mount the gimbal with the screws to know where to drill the screw holes.

Slip the bicycle grips on the ends of the steel rods. Mark the section of the auction where you want to make the cut. For assembly parts, you will need to print a 3D drawing so that the steel rods fit (he also made his own 3D assembly piece, available for download here).

For GoPro mounts, detach the apartment from the back and attach them to the sides of the box. Attach the 3D media into the slots in the GoPro mounts and screw the steel rods. Once you're done, you're ready to try the new three-axis DIY gimbal.

About the author

Shane Haumpton is a writer and photographer from New Hampshire, USA. You can check more of his work by following it chirping.

Source link


  1. I visited various blogs but the audio quality for audio songs current
    at this website is in fact excellent.

  2. Howdy! This is kind of off topic but I need some
    guidance from an established blog. Is it tough to set up your own blog?

    I’m not very techincal but I can figure things out pretty quick.
    I’m thinking about making my own but I’m not sure where to start.
    Do you have any tips or suggestions? Cheers

  3. of course like your web-site but you have to test
    the spelling on quite a few of your posts. Many of them are rife with spelling problems and
    I to find it very bothersome to tell the reality however I’ll surely come back again.

  4. Informative article, just what I wanted to find.

  5. That is a really good tip especially to those fresh to the blogosphere.
    Short but very precise information… Many thanks for sharing this one.
    A must read article!

  6. Greetings! Very useful advice within this post! It’s the little changes which will
    make the biggest changes. Thanks for sharing!

  7. It’s a pity you don’t have a donate button! I’d certainly donate to this brilliant blog!
    I guess for now i’ll settle for bookmarking and adding
    your RSS feed to my Google account. I look forward to brand new updates
    and will share this website with my Facebook group.

    Talk soon!

  8. This article offers clear idea designed for the new viewers of blogging,
    that really how to do blogging.

  9. I was more than happy to find this site. I want to to thank you
    for your time just for this wonderful read!!
    I definitely loved every little bit of it and i also have you book-marked
    to look at new information on your website.

  10. Great items from you, man. I’ve take note your stuff previous to and you
    are just too wonderful. I really like what you’ve bought here, certainly like what you are saying and the way through which you are saying it.
    You make it entertaining and you still take care of to stay it wise.

    I cant wait to learn far more from you. That is really a tremendous site.

  11. Hi! Quick question that’s completely off topic. Do you know how to make your
    site mobile friendly? My weblog looks weird when viewing from my apple
    iphone. I’m trying to find a template or plugin that might be able to resolve this issue.
    If you have any recommendations, please share. Cheers!

  12. Every weekend i used to go to see this website, because i want enjoyment, for the reason that this
    this web page conations truly good funny material too.

Leave a Reply

Your email address will not be published.